0.5
Cite Score
SJR: 0.129 / SNIP: 0.140
JMERC
Owner
Janbazan Medical and Engineering Research Center (JMERC) is the owner of IJWPH.
Volume 14, Issue 1 (2022)
J Clin Care Skill 2022, 14(1): 65-74 |
Back to browse issues page
Request Type:
History
Received: 2021/12/15 | Accepted: 2022/02/23 | Published: 2022/03/5
Received: 2021/12/15 | Accepted: 2022/02/23 | Published: 2022/03/5
How to cite this article
Krechetov I, Skvortsov A, Poselsky I. Tactile and Force Feedback Gloves for Virtual Reality and Telecontrol of Anthropomorphic Manipulators; an Analytic Review. J Clin Care Skill 2022; 14 (1) :65-74
URL: http://ijwph.ir/article-3-85449-en.html
URL: http://ijwph.ir/article-3-85449-en.html
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Rights and permissions
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
1- Office of Scientific Research and Development, Moscow Polytechnic University, Moscow, Russian Federation
2- Department of Dynamics, Strength and Resistance of Materials, Moscow Polytechnic University, Moscow, Russian Federation
2- Department of Dynamics, Strength and Resistance of Materials, Moscow Polytechnic University, Moscow, Russian Federation
Abstract (3857 Views)
Introduction: Devices that allow using the functionality of natural hand movements are of the greatest interest. The purpose of this study was to select areas of research at the intersection of several fields of science – biomechanics and cybernetics to develop scientific and technical approaches to track the movements of the operator's fingers and form feedback tactile and force communication received from the control object to achieve a new level of accuracy in work with virtual and with real objects by converting virtual contact action into physical. Methods of force feedback were implemented according which they can be divided into two groups: active and passive feedback. The main technologies used to implement various functionalities of the virtual reality glove were identified: measuring hand positions and feedback generation. The main advantages of the planned development were also identified: the ability to digitize up to 16 finger joints, tactile and force feedback, and moderate cost, a benchmark for the mass market.
Conclusion: The development of the design of the glove will be implemented using a kinematic scheme based on the kinematics of the human hand, considering the requirements of aesthetics and ergonomics of the solution. As a sensor system, it is planned to use digital Hall sensors with a capacity of up to 14 bits, high speed and, at the same time, small dimensions, allowing them to be installed directly inside the swivel joints.
Conclusion: The development of the design of the glove will be implemented using a kinematic scheme based on the kinematics of the human hand, considering the requirements of aesthetics and ergonomics of the solution. As a sensor system, it is planned to use digital Hall sensors with a capacity of up to 14 bits, high speed and, at the same time, small dimensions, allowing them to be installed directly inside the swivel joints.
Keywords: